Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2053 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0 | Front stabiliser link bar L&R |
![]() |
| SWP2077 | 2.8 VR6 | Front stabiliser link bar L&R |
![]() |
| SWP5916 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Rear suspension, sub frame mounting Length = 90mm Inner Diameter = 12mm Outer Diameter = 56mm |
![]() |
| SWP5989 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Front wishbone, rear bush [Steel type] |
![]() |
| SWP5989K | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Front wishbone, rear bush & shim [Steel type] |
![]() |
| SWP5992 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Front wishbone, rear bush [Aluminium type] |
![]() |
| SWP5992K | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Front wishbone, rear bush & shim [Aluminium type] |
![]() |
| SWP17 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Front wishbone, rear bush shim to suit: SWP5989 or SWP5992 |
|
| SWP93 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0 For vehicles without off road suspension | Top strut mounting & bearing, front L&R |
![]() |
| SWP223 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0 For vehicles without off road suspension | Top strut bearing, front L&R |
![]() |
| SWP5962 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 For vehicles with off road suspension | Top strut mounting, front L&R |
![]() |
| SWP5962B | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 For vehicles with off road suspension | Top strut bearing, front L&R |
![]() |
| SWP5962K | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 For vehicles with off road suspension | Top strut mounting & bearing as a kit, front L&R |
![]() |
| VSP | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Sump plug & washer 19mm spanner size head |
![]() |
| SWP128 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Oil filler cap |
![]() |
| SWP46 | 1.9d, 1.9td, 1.9tdi | Diesel stop solenoid For Bosch EPVE pump |
|
| SWP901 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Side indicator lens, GREEN |
|
| SWP902 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Side indicator lens, CLEAR |
|
| SWP903 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Side indicator lens, BLUE |
|
| SWP904 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Side indicator lens, SMOKED |
|
| SWP905 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Side indicator lens, AMBER |
|
| SWP906 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Side indicator lens, RED |
|
| SWP907 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Side indicator lens, YELLOW |
|
| HN12 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Front hub nut L&R |
![]() |
| SWP12621C | 1.6 | Electronic coil [Pin fit HT lead] |
![]() |
| SWP6229 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Windscreen washer pump, single outlet |
![]() |
| SWP6230 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Twin outlet washer pump |
![]() |
| QSJ1141 | 1.4, 1.6, 1.8, 1.9D, 1.9SDi, 1.9td, 1.9tdi, 2.0, 2.8 VR6 | Lower front ball joint, L&R |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |