Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2353 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Front stabiliser link bar L&R |
|
| SWP2517 | 1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Rear stabiliser link bar L&R |
![]() |
| WP138 |
2.2tid YS3F Models |
Header tank cap |
![]() |
| SWP6010 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Rear suspension damper bush 70mm OD |
![]() |
| SWP6011 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Rear suspension damper bush 45.5mm OD |
![]() |
| SWP6024 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Rear suspension arm. Note: Old Vectra, Peugeot 406, BMW E36 Rose joints won’t fit this. |
![]() |
| SWP6015 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Front anti roll bar bush to suit 24mm anti roll bar 2 Bumps on front of bush |
![]() |
| SWP6016 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Front anti roll bar bush to suit 24.2mm anti roll bar 3 Bumps on front of bush |
![]() |
| SWP6017 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Front anti roll bar bush to suit 25.2mm anti roll bar
No Bumps on front of bush |
![]() |
| SWP6678 | 1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Rear anti roll bar bush 17mm |
![]() |
| SWP51 | All models | Temperature sensor, exterior. Also known as an ambier sensor |
![]() |
| SWP6018 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Front hub, grease cap 57mm diameter |
![]() |
| SWP6020 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models |
Front wishbone, rear bush |
![]() |
| SWP6034 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models - Chassis No 58999999 + 51999999 |
Front sub frame bush [Shorter type] 2 per car |
![]() |
| SWP6035 |
1.8i, 1.8t, 2.0t, 2.2tid YS3F Models - Chassis No 58999999 + 51999999 |
Front sub frame bush [Longer type] 2 per car |
![]() |
| SWP6032 | 1.8i, 1.8t, 2.0t, 2.2tid
YS3F Models Chassis No 61000001 Onwards |
Front sub frame bush [Longer type] 2 per car |
![]() |
| SWP6033 | 1.8i, 1.8t, 2.0t, 2.2tid
YS3F Models Chassis No 61000001 Onwards |
Front sub frame bush [Shorter type] 2 per car |
![]() |
| SWP12724C | 1.8 16v | Coil pack |
![]() |
| SWP2126 | 1.8, 2.2tid | Sump plug & rubber seal
Round head with Torx 45 |
![]() |
| SWP419B/N | 2.2tid YS3F Models |
Front wishbone pinch bolt & nut |
|