Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2531 | Twingo I - (1993-07) 1.2i Twingo II - (2007-) 1.2i Twingo II - (2007-) 1.2i turbo Twingo II - (2007-) 1.5TD Twingo II - (2007-) 1.6i |
Front stabiliser link bar LH |
|
| SWP2532 | Twingo I - (1993-07) 1.2i Twingo II - (2007-) 1.2i Twingo II - (2007-) 1.2i turbo Twingo II - (2007-) 1.5TD Twingo II - (2007-) 1.6i |
Front stabiliser link bar LH |
|
| SWP801 | All models Excluding automatic | Pedal rubber set Brake & clutch |
![]() |
| HN14 | 1.2 | Rear hub nut L&R |
![]() |
| HN17 | 1.2 | Front hub nut L&R Castellated type |
![]() |
| SWP6014 | 1.2 | Front top strut mounting L&R [Mounting only, No bearing] |
![]() |
| SWP6014B | 1.2 | Front top strut bearing L&R |
![]() |
| SWP6014K | 1.2 | Front top strut mounting & bearing kit L&R |
![]() |
| SWP6227 | 1.2 | Twin outlet washer pump |
![]() |
| SWP6295 | 1.2 | Oil filler cap |
![]() |
| SWP2122K | 1.2 | Sump plug & washer kit 16mm |
![]() |
| SWP2122P | 1.2 | Sump plug 16mm |
![]() |
| SWP2122W | 1.2 | Sump washer 16mm |
![]() |
| SWP6325 | 1.2, 1.2 16v, 1.2 Turbo, 1.5dci, 1.6RS | Rear axle bush |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |