Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2094 | 1.8, 1.8di, 1.8tdci | Front stabiliser link bar L&R |
|
| SWP2095 | 1.8, 1.8di, 1.8tdci | Rear stabiliser link bar L&R |
![]() |
| SWP12614C | 1.8 16v | Electronic coil for Distributorless ignition |
![]() |
| SWP2124K | 1.8, 1.8di, 1.8tdci | Sump plug with rubber seal |
![]() |
| SWP2124W | 1.8, 1.8di, 1.8tdci | Rubber seal for sump plug |
![]() |
| SWP6251 | 1.8, 1.8di, 1.8tdci | Front wishbone, front bush |
![]() |
| SWP6258 | 1.8, 1.8di, 1.8tdci | Front top strut mounting L&R |
![]() |
| SWP6275B | 1.8, 1.8di, 1.8tdci | Front top strut bearing L&R |
![]() |
| SWP6258K | 1.8, 1.8di, 1.8tdci | Front top strut mounting & bearing kit L&R |
![]() |
| SWP6273 | ZETEC Engine | Thermostat housing |
![]() |
| SWP6281 | ZETEC Engine | Top thermostat housing |
![]() |
| SWP428K | 1.8, 1.8di, 1.8tdci | Mass flywheel bolt kit |
![]() |
| DC48 | 1.8 Petrol engine only | Oil filler cap |
![]() |
| SWP6225 | Front & rear wash | Washer pump, single outlet |
![]() |
| FWP2 | Front wash only | Washer pump, twin outlet |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |
| DC160K | Various models Please check against sizes shown before buying |
Ball joint dust boot rubber kit: Small hole at top = 18mm Big hole at bottom = 40.5mm Uncompressed height = 37mm |
![]() |