Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2443 | 280, 350 FWD & RWD | Front stabiliser link bar L&R |
![]() |
| SWP2093 | Twin rear wheel only | Rear stabiliser link bar L&R |
|
| SWP2099 | All models | Front stabiliser link bar L&R |
|
| SWP5953 | All models | Front wishbone, rear bush |
![]() |
| SWP5967 | All models | Front wishbone, front bush |
![]() |
| SWP5959 | All models FWD & RWD | Top strut mounting, front |
![]() |
| SWP5960 | All models FWD & RWD | Rear shock absorber bush, lower 31mm |
![]() |
| SWP5961 | All models | Rear shock absorber bush, upper 37mm |
![]() |
| SWP5976 | All FWD models | Anti roll bar bush, front |
![]() |
| BRGF3 | All models | Prop shaft centre bearing 30mm |
![]() |
| SWP6337 | 2008→ | Prop shaft centre bearing 35mm |
![]() |
| SWP8433X | All models | Horse shoe clip, bolt & lock tab washer for prop |
![]() |
| SWP6225 | All models | Washer pump, single outlet |
![]() |
| FWP3 | All models | Washer pump, twin outlet |
![]() |
| SWP274 | Various models | Prop shaft Jurid coupling |
![]() |
| SWP6233 | 6 Speed box 2004 Onwards short wheel base models | Prop shaft JURID doughnut coupling |
![]() |
| SWP6210 | 2.4d DURATORQUE 2000 - 2006 | Vacuum pump |
![]() |
| SWP6300 | 2.4d DURATORQUE 2006→ | Vacuum pump |
![]() |
| SWP6276 | 2.4d DURATORQUE | Sump Metal gasket to suit vacuum pump [SWP6210 & SWP6300] Above items |
![]() |
| SWP2124K | 2.4d DURATORQUE | Sump plug with rubber seal |
![]() |
| SWP2124W | 2.4d DURATORQUE | Rubber seal for sump plug |
![]() |
| SWP429K | 2.4d DURATORQUE | Mass flywheel bolt kit |
![]() |
| SWP6286 | 2.0 Diesel FWD | Oil filler cap |
![]() |
| DC48 | 2.0 DOHC | Oil filler cap |
![]() |
| SWP6331 | For vehicles with air conditioning | Heater control valve |
![]() |
| SWP8426X | 2000 – 2003 Fitted to diff end of prop shaft Customer may have an after market replacement prop, so please check sizes on prop |
Prop shaft spline for rear section of prop [16 splines] To suit SWP5272X |
|
| SWP8425X | 2000 – 2007 Fitted to diff end of prop shaft Customer may have an after market replacement prop, so please check sizes on prop |
Prop shaft flange to suit 30.2mm cap x 92.1mm span EXTERNAL CIRCLIP U/J [SWP8276X] |
![]() |
| SWP8432X | 2000 – 2007 Fitted to diff end of prop shaft Customer may have an after market replacement prop, so please check sizes on prop |
Prop shaft flange to suit 27mm cap x 74mm span EXTERNAL CIRCLIP U/J [SWP5272X] |
![]() |
| SWP8276X | 2000 – 2007 Fitted to diff end of prop shaft Customer may have an after market replacement prop, so please check sizes on prop |
Prop shaft universal joint 30.2mm cap x 92.1mm span EXTERNAL CIRCLIP |
![]() |
| SWP5272X | 2000 – 2007 Fitted to diff end of prop shaft Customer may have an after market replacement prop, so please check sizes on prop |
Prop shaft universal joint 27mm cap x 74mm span EXTERNAL CIRCLIP |
![]() |
| SWP8277X | 2002 – 2007 Fitted to GEARBOX end of prop shaft Customer may have an after market replacement prop, so please check sizes on prop |
Prop shaft universal joint 30.2mm cap x 82mm span EXTERNAL CIRCLIP |
![]() |
| SWP8278X | 2000 - 2007 Fitted to GEARBOX & Middle sections Customer may have an after market replacement prop, so please check sizes on prop |
Prop shaft universal joint 27mm cap x 79.8mm span STAKED / CRIMPED |
![]() |
| SWP8280X | 2007→ Fitted throughout prop shaft Customer may have an after market replacement prop, so please check sizes on prop |
Prop shaft universal joint 29.98mm cap x 92.1mm span STAKED / CRIMPED |
![]() |
| SWP6669 | 2000 – 2006 FWD & RWD | Steering coupling |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |