Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| QR1834 | All models | Outer track rod end LH |
![]() |
| QR1833 | All models | Outer track rod end RH |
![]() |
| QSJ880 | Excluding 4x4 & Cosworth | Front track control arm LH |
|
| QSJ879 | Excluding 4x4 & Cosworth | Front track control arm RH |
|
| QSJ1197 | 4x4 & Cosworth only | Front track control arm LH |
|
| QSJ1198 | 4x4 & Cosworth only | Front track control arm RH |
|
| 6192705 | 4x4 & Cosworth only | Front track control arm, inner bush |
![]() |
| QSK220 | Excluding 4x4 & Cosworth | Front track control arm, outer bush |
![]() |
| 217HD | Excluding 4x4 & Cosworth | Front track control arm, outer bush kit. Heavy duty |
![]() |
| SSCBK | Excluding Cosworth | Steering column bush kit |
![]() |
| EM680 | Excluding 2.8, 2.9, 4x4 & Cosworth up to 1987 | Gearbox mounting |
![]() |
| SWP95 | All models | Rear axle to body mounting |
![]() |
| SWP5880 | Excluding Cosworth | Front top strut mounting |
![]() |
| SWP222 | Excluding Cosworth | Front top strut mounting bearing |
![]() |
| SWP5881 | 1.6, 1.8, 1.8TD, 2.0, 2.3, 2.3D 1987 onwards | Front anti roll bar bush 20mm |
![]() |
| DC22K | Excluding Cosworth | Sump plug & washer |
![]() |
| CPR4 | Excluding Cosworth 1987 onwards | Clutch ratchet & pawl repair kit 45mm radius |
![]() |
| CPR5 | Excluding Cosworth 1987 onwards | Clutch ratchet & pawl repair kit 50mm radius |
![]() |
| CPR6 | Excluding Cosworth 1987 onwards | Clutch ratchet & pawl repair kit 55mm radius |
![]() |
| SWP112 | Excluding Cosworth | Brake calliper guide kit. [Eliminates brake shudder] |
![]() |
| DC17 | OHC engine | Oil filler cap |
![]() |
| SWP127 | 1800 CVH Engine | Oil filler cap Ratchet type |
![]() |
| SWP2181 | 2.3 Diesel up to1987 | Oil filler cap |
![]() |
| SWP2182 | 2.3 Diesel 1987 to 1993 | Oil filler cap |
![]() |
| SWP2183 | 1.8 Diesel | Oil filler cap |
![]() |
| SWP1113 | OHC engine | Thermostat housing. With overflow pipe |
![]() |
| DC14 | 1800 CVH Only | Thermostat gasket |
![]() |
| 2000Guibo | 2.0, 2.3 | Prop shaft GUIBO coupling with bonded, Non removable doughnut |
![]() |
| GDC | 2.0, 2.3 | Prop shaft doughnut coupling |
![]() |
| JURID | MT75 [Excluding 4x4] | Prop shaft doughnut coupling |
![]() |
| SWP180 | 4x4 only | Prop shaft doughnut coupling We can no longer supply this coupling but can offer an alternative solution. You can remove the 3 prong yolk from your MT75 gearbox & we will supply you with a round flange to replace it. We can then convert your prop with a fixed joint to suit the flange. |
![]() |
| FCBR | All models | Prop shaft centre bearing insulator rubber |
![]() |
| FCB | All models | Prop shaft centre bearing |
![]() |
| BRGF2 | All models | Prop shaft centre bearing with shrouds |
![]() |
| SWP199 | All models | Prop shaft centre bearing, rubber & carrier Complete. |
![]() |
| SWP47 | 1.8td, 2.3d | Diesel stop solenoid For Delphi / Lucas equipment |
|
| FSRL | All models from 1987 on | Side repeater lens, AMBER |
![]() |
| SWP77 | All models from 1987 on | Side repeater lens, CLEAR |
![]() |
| SWP908 | All models from 1987 on | Side repeater lens, BLUE |
![]() |
| SWP909 | All models from 1987 on | Side repeater lens, GREEN |
![]() |
| SWP910 | All models from 1987 on | Side repeater lens, RED |
![]() |
| SWP911 | All models from 1987 on | Side repeater lens, SMOKED |
![]() |
| SWP24 | All models from 1987 on | Side repeater lens, bulb holder |
![]() |
| 501A | All models from 1987 on | Side repeater, amber bulb |
![]() |
| SWP6225 | All models without rear wipe | Washer pump, single outlet |
![]() |
| FWP2 | All models with rear wipe | Windscreen washer pump, twin outlet |
![]() |
| HN5 | 2.8 4x4, 2.9 4x4, 2.0 4x4, Cosworth 4x4 | Front hub nut L&R |
![]() |
| DC48 | DOHC engine | Oil filler cap |
![]() |
| SWP12614C | 1.6, 1.8 | Electronic coil for Distributorless ignition |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |