Tel: 01633 - 256067
Part Number | Model | Description | Picture |
---|---|---|---|
SWP2518 | 1.25, 1.4, 1.6tdci, 1.6ti | Front stabiliser link bar L&R | |
SWP6752K | 1.25, 1.4, 1.6LPG, 1.4TDCI, 1.6TDCI, 1.6TI | Front top strut mounting & bearing kit Equivalent to: FSM5378 VKDA35434 |
|
SWP6794 | 1.25, 1.4, 1.6LPG, 1.4TDCI, 1.6TDCI, 1.6TI | Rear top strut mounting Equivalent to:FSM5411 VKDA40434 |
|
SWP6769 | 1.25, 1.4, 1.6LPG, 1.4TDCI, 1.6TDCI, 1.6TI | Rear axle bush Equivalent to FSK7745 |
|
SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP434B/N | 1.25, 1.4, 1.6tdci, 1.6ti | Pinch bolt & nut Fits in ball joint L&R: QSJ3556 – TC2164 – SS2760 – FBH5566 – FD-BJ-8090 Fits wishbones L&R: QSQA2427 + QSA2428 – SS2762 + SS2761 – FCA6720 + FCA6721 – TC2184 + TC2185 |
|
SWP6726 | 1.25, 1.4, 1.4LPG, 1.4TDCI, 1.6TDCI, 1.6TI | Driveshaft seal | |
SWP6746 | 1.0L 3 Cyl FOX 5-11-12→ 1.25 ZETEC 21-7-08→ 1.4 ZETEC 21-7-08→ 1.6 ZETEC 21-7-08→ As: 1135010 |
Oil filler cap | |
SWP6753 | 1.25, 1.4, 1.6LPG, 1.4TDCI, 1.6TDCI, 1.6TI | Twin outlet washer pump | |
SWP6748 | Various models: Please check against photograph |
Under body heat shield [exhaust to floor] & noise insulations on bulk head [30mm OD] |